Owner manual
Table Of Contents
- DAT SAS Tape Drives
- Table of Contents
- About this guide
- 1 Before you start
- 2 Drivers and backup software
- 3 Installing an internal DAT tape drive
- 4 Installing an external SAS tape drive
- 5 Verify installation
- 6 Operating your tape drive
- 7 Use the correct media
- 8 Using HP OBDR
- 9 Diagnostic Tools and Performance
- 10 Troubleshooting
- 11 Replacing an internal tape drive
- A Connecting an external tape drive to an internal SAS port
- Index
Figures
Front view of HP StorageWorks DAT 320 tape drive .................................................... 131
Front view of HP StorageWorks DAT 160 tape drive .................................................... 142
Supplied cable ....................................................................................................... 223
Attaching mounting screws ....................................................................................... 244
Installing tape drive ................................................................................................. 255
Selecting the correct cabling option for an internal tape drive ....................................... 276
Connecting cables to the dedicated HBA ................................................................... 287
Connecting cables to the DAT 320 tape drive ............................................................. 298
Connecting cables to the DAT 160 tape drive ............................................................. 299
Cabling to the spare SAS port (some HP ProLiant servers) ............................................. 3010
Connecting cables to the DAT 320 tape drive ............................................................. 3111
Connecting cables to the DAT 160 tape drive ............................................................. 3112
Removing the existing SAS cable ............................................................................... 3313
Cable routing with replacement HP mini-SAS or Infiniband cable .................................. 3414
Connecting cables to the DAT 320 tape drive ............................................................. 3515
Connecting cables to the DAT 160 tape drive ............................................................. 3516
Securing drive example 1, mounting hardware used .................................................... 3617
Securing drive example 2, no mounting hardware used ............................................... 3618
Supplied SAS external cable (connect to external port) ................................................. 3719
Connecting the SAS cable to the server ...................................................................... 3820
Connecting the cables to the DAT 320 tape drive ........................................................ 3921
Connecting the cables to the DAT 160 tape drive ........................................................ 3922
Front panel, HP StorageWorks DAT 320 external drive ................................................. 4323
Front panel, HP StorageWorks DAT 160 external drive ................................................. 4424
Inserting an 8 mm cartridge into an HP StorageWorks DAT 320 external drive ................ 4725
Ejecting a DAT 320 cartridge from an HP StorageWorks DAT 320 external drive ............ 4826
Write protecting a cartridge ..................................................................................... 5327
Inserting cartridge for OBDR .................................................................................... 5828
Keeping eject button pressed down, power on in OBDR model ..................................... 5929
Example split SAS cable (connects external drive to internal port) .................................. 7130
Feeding SAS cable through empty slot from inside of server .......................................... 7331
Cabling to the spare SAS port on host controller ......................................................... 7432
6