Owner manual
Table Of Contents
- DAT SAS Tape Drives
- Table of Contents
- About this guide
- 1 Before you start
- 2 Drivers and backup software
- 3 Installing an internal DAT tape drive
- 4 Installing an external SAS tape drive
- 5 Verify installation
- 6 Operating your tape drive
- 7 Use the correct media
- 8 Using HP OBDR
- 9 Diagnostic Tools and Performance
- 10 Troubleshooting
- 11 Replacing an internal tape drive
- A Connecting an external tape drive to an internal SAS port
- Index
Securing the blanking plate ...................................................................................... 7533
Removing existing SAS cable .................................................................................... 7634
Feeding SAS cable through empty slot from inside of server .......................................... 7735
SAS cable routing ................................................................................................... 7836
Securing the blanking plate ...................................................................................... 7937
DAT SAS Tape Drives 7