Owner manual
Table Of Contents
- DAT SAS Tape Drives
- Table of Contents
- About this guide
- 1 Before you start
- 2 Drivers and backup software
- 3 Installing an internal DAT tape drive
- 4 Installing an external SAS tape drive
- 5 Verify installation
- 6 Operating your tape drive
- 7 Use the correct media
- 8 Using HP OBDR
- 9 Diagnostic Tools and Performance
- 10 Troubleshooting
- 11 Replacing an internal tape drive
- A Connecting an external tape drive to an internal SAS port
- Index
5. Feed the external tape drive connector and cable through the empty slot from the inside of the
server.
4. internal connector for SAS HBA1. HP split cable with attached blanking plate
5. internal connector for disk bay2. empty slot
3. external connector for tape drive
Figure 35 Feeding SAS cable through empty slot from inside of server
.
DAT SAS Tape Drives 77