Manual
Table Of Contents
- HP StoreEver Tape Libraries Failover User Guide
- Contents
- 1 Overview
- 2 Enabling basic path failover
- 3 Installing advanced path failover
- 4 Preparing the switches and hosts for failover
- 5 Configuring failover for the HP StoreEver ESL G3 Tape Libraries
- 6 Configuring failover for HP StoreEver MSL6840 Tape Libraries
- 7 Configuring failover for other HP StoreEver MSL Tape Libraries
- 8 Installing and using Windows advanced path failover drivers
- 9 Installing and using Linux advanced path failover drivers
- 10 Installing and using HP-UX advanced path failover drivers
- 11 Troubleshooting failover operation
- 12 Advanced troubleshooting techniques
- 13 Support and other resources
- A Data Protector device discovery with advanced path failover
- Index
Verifying data path failover
After data path failover is enabled:
1. Navigate to the Status > Drive Status screen, expanding the section for the drive to see the
details.
2. Expand the section for each drive to see the details. The Data Path Failover field will show
the type of data path failover configured.
Verify that the interface status for both ports is Login complete.
3. From the host, verify connectivity to the drive.
30 Configuring failover for HP StoreEver MSL6840 Tape Libraries