Manual
Table Of Contents
- HP StoreEver Tape Libraries Failover User Guide
- Contents
- 1 Overview
- 2 Enabling basic path failover
- 3 Installing advanced path failover
- 4 Preparing the switches and hosts for failover
- 5 Configuring failover for the HP StoreEver ESL G3 Tape Libraries
- 6 Configuring failover for HP StoreEver MSL6840 Tape Libraries
- 7 Configuring failover for other HP StoreEver MSL Tape Libraries
- 8 Installing and using Windows advanced path failover drivers
- 9 Installing and using Linux advanced path failover drivers
- 10 Installing and using HP-UX advanced path failover drivers
- 11 Troubleshooting failover operation
- 12 Advanced troubleshooting techniques
- 13 Support and other resources
- A Data Protector device discovery with advanced path failover
- Index
"SCSI" bus and the device associated with the virtual device that manages the paths is shown as
a "ROOT" device.
The lower half of this driver acts like a class driver and it attaches to the devices presented by the
lower driver. The upper half acts like a virtual bus driver, presenting abstractions of devices to the
layers above. For example, a single tape device may have many paths to it, but only a single
virtual tape device is presented to the layers above, and the driver transparently manages the
multiple paths to the physical tape device.
Figure 16 (page 40) shows the various device objects presented by the drivers. The abbreviations
are:
• PDO: Physical device object
• FDO: Functional device object
• FPDO: PDO created by bus filter driver
• FFDO: FDO created by bus filter driver
• CDO: Control device object; used by diagnostic interface
Windows driver theory of operation 39