Software Licenses Manual

2 Installation
The HP StoreFront Analytics Pack for VMware vCOPS™ 1.1 is installed into the vCenter Operations
Manager custom GUI by using the Update tab of the vCenter Operations Manager Administration
interface and a PAK file.
Installing the software
The HP StoreFront Analytics Pack for VMware vCOPS™ 1.1 software can be installed on a
Windows, Linux, or vApp platforms.
This section describes the installation process for each platform.
Windows Installation Procedure
If you have a standalone installation, install the HP Storage adapter by extracting the adapter
installation files from a ZIP file and running an installation utility.
Prerequisites
• Read the release notes that are included with the downloaded zip file.
Procedure
1. Download HP StoreFront Analytics for VMware vCOPS 1.1 from the following site:
https://h20392.www2.hp.com/portal/swdepot/index.do
2. Extract the downloaded zip file to a temporary folder.
3. Open the ZIP file and extract the files to a temporary folder on your vCenter Operations
Manager server.
4. In the temporary folder, run the installer (install.bat) from a command window.
5. Log in to the Custom user interface as an administrator.
6. Select Admin > Support.
7. On the Info tab, find the Adapters Info pane and click the Describe icon ( ). The Describe
icon is located at the top right of the Adapters Info pane.
8. Click Yes to start the describe process then click OK.
6 Installation