Manual

4-17
Library Operation
Loading Cartridges Into the Library
Library Operation
Loading Cartridges Through the Bulk Load
Access Door
1. Verify that the drive status displays (if not, press
CANCEL
until it does).
2. Verify that the drives are all empty ( displays after the drive number).
If
the drives are full, use the mailslot to load tapes
.
NOTE Some software packages require that cartridges be inserted and removed
using the software. If a software package manages files in the library, check
the software documentation before proceeding.
3. Press
NEXT
until RELEASE DOOR displays, then press
ENTER
.
4. DOOR RELEASED, READY, and DRIVE STATUS each display briefly, then
the drive status displays.
5. Unlock the bulk load access door using the key.
6. Open the top of the door, then lift it out (see Figure 4-4).
Figure 4-4 Loading Tape Cartridges Through the Bulk Load Access Door