User's Manual

removing or replacing … 8-10
IP preserve
DHCP server … 8-16
overview … 8-16
rules, operating … 8-16
summary of effect … 8-19
IPX
network number B-7
J
Java … 5-4, 5-5
jumbo packets
configuration 10-19
excessive inbound … 10-23
flow control 10-18, 10-22
GVRP operation 10-18
management VLAN … 10-22
maximum size 10-17
MTU 10-17
port adds and moves 10-18
port speed … 10-18
security concerns … 10-23
standard MTU … 10-18
through non-jumbo ports … 10-24
traffic sources 10-18
troubleshooting … 10-25
VLAN tag 10-17
voice VLAN … 10-22
K
kill command 7-8
LACP
802.1x, not allowed 12-23
active … 12-16, 12-20
CLI access 12-12
default port operation … 12-21
described … 12-7, 12-18
Dyn1 12-8
dynamic 12-20
enabling dynamic trunk 12-16
full-duplex required 10-5, 12-5, 12-18
IGMP 12-24
no half-duplex … 12-25
operation not allowed C-11
outbound traffic distribution … 12-26
overview 12-5
passive 12-16, 12-20
removing port from active trunk 12-17
restrictions … 12-23
standby link 12-20
status, terms 12-22
STP 12-24
VLANs 12-24
with 802.1x 12-23
with CDP 13-40
with port security 12-23
learning bridge … 8-2
limit, broadcast 10-11
link speed, port trunk 12-3
link test
description … C-35
for troubleshooting … C-35
link, serial … 7-3
load balancing
See port trunk.
logical port 12-9
loop, network … 12-5
lost password … 5-11
M
MAC address 8-14, B-6, D-2
duplicate … C-15, C-21
learned B-13, B-14
listing connected devices … D-6
port … D-2, D-3
switch … D-2
VLAN … D-2
management
interfaces described 2-2
server URL 5-12, 5-13
server URL default 5-13
management VLAN
See VLAN.
manager access 13-13
manager password … 5-8, 5-10
MDI/MDI-X configuration, display 10-15
MDI/MDI-X port mode, display 10-15
media type, port trunk … 12-3
memory
flash 3-10, 6-2
4 – Index
L