User's Manual

scale: 1" = 1"
17 18 19 20
!
Reset
26477a
1
2
3
4
Figure 6 Verifying power-on LEDs
Table 10 Power-on LEDs
Item
Description
Indicators
1UIDLED
Off
2
Health ID LED Steady green light
3
Module status LED Steady green light
4
Port status LED
Steady green light
Set the sw
itch Ethernet IP address
To set the Ethernet IP address:
1. Verify that the enclosure is powered on.
2. Verify th
at the switch is installed.
3. Choose one of the following methods to set the Ethernet IP address:
• Using Enclosure Bay IP Addressing (EBIPA)
• Using ex
ternal DHCP
• Setting the IP a ddress manually
Using Enclosure Bay IP Addressing (EBIPA)
To set the Ethernet IP address using EBIPA:
1. Open a web browser and connect to the active OA.
2. Enable EBIPA for the corresponding interconnect bay.
3. Click Apply to restart the switch.
4. Verify the IP address using a Telnet or SSH login to the switch, or by selecting the switch in the OA
GUI Rack Overview window .
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
23