HP DesignJet Z2600 Z5600 PostScript Printer - User guide

Change the language of the HP DesignJet Utility
The HP DesignJet Utility can work in the following languages: English, Portuguese, Spanish, Catalan (Windows
only), French, Dutch, Italian, German, Polish, Russian, Simplied Chinese, Traditional Chinese, Korean and
Japanese.
●
Under Windows, select Tools > Set Language and select a language from the list.
●
Under Mac OS X, the language is changed as for any other application. In System Preferences, select
Language & Region and re-launch the application.
Change the language of the Embedded Web Server
The Embedded Web Server can work in the following languages: English, Portuguese, Spanish, Catalan, French,
Italian, German, Russian, Simplied Chinese, Traditional Chinese, Korean and Japanese. It uses whichever
language you have specied in your Web browser's options. If you have specied a language that it cannot
support, it works in English.
To change the language, you must change your Web browser's language setting. For example, in Internet
Explorer version 6, go to the Tools menu and select Internet Options, Languages. Then ensure that the language
you want is at the top of the list in the dialog box.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep mode to
save power. To change the time the printer waits before it goes into sleep mode, go to the front panel and press
, then , then Setup > Front panel options > Sleep mode wait time. Select the wait time you want and
then press
OK; you can set the time from 1 to 240 minutes. The default time is 20 minutes.
Turn the buzzer on and o
To turn the printer's buzzer on or o, go to the front panel and press , then , then Setup > Front panel
options
> Buzzer, and select on or o. By default, the buzzer is set to on.
Change the front-panel display brightness
To change the brightness of the front-panel display, press , then , then Setup > Front panel options >
Display brightness, and select a value you want. Press OK to set the value. The default brightness is set to 50.
Change the units of measurement
To change the units of measurement in the front-panel display, press , then , then Setup > Front panel
options
> Unit selection, and select English or Metric. By default the units are set to metric.
Congure network settings
You can view and congure the network settings from the Embedded Web Server, the HP DesignJet Utility or the
front panel.
To do so with the Embedded Web Server, select the Setup tab, then Networking (on the right side of the screen).
ENWW Change the language of the HP DesignJet Utility 29