HP DesignJet Z2600 Z5600 PostScript Printer - User guide

You can specify even faster draft-quality printing by using Economode, as follows. This is intended mainly for
documents containing only text and line drawings.
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. Select
Custom Options, then set the quality level to Fast and check the Economode box.
●
In the Mac OS X Print dialog: go to the Paper/Quality panel and set the quality options to Custom, then set
quality to Fast and check the Economode box.
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality > Custom. Set Quality
level to Fast, and Economode to On.
●
Using the front panel: press , then , then Setup > Printing preferences > Print quality > Enable
economode
.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front panel.
High-quality printing
You can specify high-quality printing in the following ways:
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. Move the
print-quality slider to the extreme right ('Quality').
●
In the Mac OS X Print dialog: go to the Paper/Quality panel and move the print-quality slider to the extreme
right ('Quality').
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality > Standard options >
Quality.
●
Using the front panel: press , then , then Setup > Printing preferences > Print quality > Select
quality level
> Best.
NOTE: If the print quality is set from your computer, it overrides the print-quality setting in the front panel.
If you have a high-resolution image
If your image has a resolution greater than the rendering resolution (which you can see in the Custom Print
Quality Options box under Windows), print sharpness may be improved by selecting the Maximum Detail option.
This option is available only if you are printing on glossy paper and you have selected Best print quality.
●
In the driver dialog (Mac OS X Print dialog): select Custom instead of Standard print-quality options, then
check the Maximum Detail box.
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality > Custom. Set Quality
level to Best, and Maximum detail to On.
●
Using the front panel: press , then , then Setup > Printing preferences > Print quality > Enable
maximum detail
.
NOTE: The Maximum Detail option results in slower printing with photo papers, but it does not increase the
amount of ink used.
Print with no margins
Printing with no margins (to the edges of the paper) is known as borderless printing. This can be done only on
rolls of glossy paper.
ENWW Advanced print settings 59