HP DesignJet Z2600 Z5600 PostScript Printer - User guide

Using AutoCAD
1. Open the AutoCAD le and select a layout.
2. Click the Plot icon at the top of the window.
3. Ensure that the correct printer is selected, then press the Properties button.
4. Select the Device and Document Settings tab, and press the Custom Properties button.
5. In the Paper/Quality tab, check the Show preview before printing box, and select the paper type that you
intend to use.
NOTE: If you select neither the paper source nor the paper type, the printer will not print on any protected
roll (see Roll protection on page 62).
6. Select the print quality (your own choice between speed and quality of printing).
90 Chapter 11 Practical printing examples ENWW