HP DesignJet Z5600 Photo Printer Series - Certificate of Volatility

This statement provides a generic view of memory devices volatility of the stated Designjet printers. It should not be use as a supporting document directly
or indirectly for any claims against Hewlett-Packard. HP assumes no obligation to any legal issues arise from the use of this document directly or indirectly.
This letter is privileged, confidential and contains private information. Any reading, retention, distribution or copying of this communication by any person
other than its intended recipient is prohibited
HP DesignJet Z5600 Photo Printer Series
Certificate of Volatility
Introduction
This document is a statement regarding the volatility of customer data stored in memory devices and hard
disk drives of the HP DesignJet Z5600 Photo Printer series
The printer uses volatile memory to store customer data during the printing process. When the printer is
turned off, this volatile memory is erased.
The printer uses non-volatile memory to store device configuration information. This non-volatile information
is used to initialize the volatile memory when the printer is turned on and at the beginning of a print job.
The printer also contains a hard disk drive that retains data after the printer is powered off.
Volatile memory
Volatile memory in HP DesignJet Z5600 Photo Printer series include:
Main RAM memory. 640 MB by default. Used as system memory. All information is erased when
the printer is powered off.
Other volatile memory used as the main memory for some ASICs or as microprocessor cache.
Non-volatile memory
Non-volatile memory components in HP DesignJet Z5600 Photo Printer series include:
CMOS Memory BIOS. 4 MB. Does not contain user data. Its purpose is to act as the BIOS
bootloader.
NVM at line sensor. 2 KB. Contains calibration tables for the sensor.
NVM at analog encoder PCA. 256 KB. Contains printer settings and calibrations; it also contains
usage counters. It can be reset to factory defaults by a service engineer.
NVM in I/O Card. 64 KB. Contains information with the control parameters for the Gigabit
Ethernet card.

Summary of content (2 pages)