HP LaserJet Pro M11-M13 - Getting Started Guide

1
ไทย .........................13
한국어 ....................10
简体中文 ................. 4
English .................... 1
Tiếng Việt ...............19
繁體中文 ................16
Bahasa Indonesia ..... 7
Windows
1. For Windows 7 or earlier, do not connect the USB cable before
installing the software. The installation process prompts to
connect the cable at the appropriate time. If the cable is already
connected, restart the printer when installation prompts to
connect the cable.
2. Continue to “6. Locate or download the software
installationles.”
NOTE: During software installation, select the option to Directly
connect this computer using a USB cable.
Mac
1. Connect the USB cable between the computer and the printer
before installing the software.
2. Continue to “6. Locate or download the software
installationles.”
Perform a wireless installation
(M12w wireless models only)
Before starting the installation, verify that the wireless access
point is working correctly. Make sure that the printer, router, and
computer are all turned on and that the computer is connected to
the same wireless network that the printer will be connected to.
If there is not a solid blue light on the top of the printer, go to
Process A.
If there is a solid blue light on the top of the printer, go to Process B.
Process A
1. Place the CD in the CD-ROM drive, and then click Install.
When the Printer connections dialog appears, choose
Congure to print over the Wireless Network.
2. Follow the on-screen instructions.
Process B
1. Place the CD in the CD-ROM drive, and then click Install.
When the Printer connections dialog appears, choose
Connect to a congured Wireless Network printer.
2. Follow the on-screen instructions.
3. Select the printer detected by the software. If the printer
cannot be detected by the installer, manually input the
printer’s IP address to continue the installation.
NOTE: Print a conguration page to nd the printer’s
IPaddress. At the printer control panel, press and hold the
Cancel button for 5 seconds, and then release the Cancel
button to print the conguration page. The IP address is listed
on the conguration page in the Network Information section.
Manually congure the IP address
See the printer user guide for information on how to manually congure
the IP address www.hp.com/support/ljm11-m13.
2
IMPORTANT:
First, follow
Steps 1 - 3
on the printer hardware
setup poster, then continue
with Step 4.
www.hp.com/support/ljm11-m13 www.register.hp.com
LaserJet Pro M11-M13 series
Getting Started Guide
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
4. Set up the Control Panel
At the printer control panel, check the LED status before beginning software installation.
5. Select a connection method