Hardware Reference Guide HP t200 Zero Client for MultiSeat
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information.
iv About This Book ENWW
Table of contents 1 Front Panel Components ................................................................................................... 1 2 Rear Panel Components .................................................................................................... 2 3 Serial Number Location .................................................................................................... 3 Appendix A Specifications ......................................................................................
vi ENWW
1 Front Panel Components For more information, http://www.hp.com and search for your specific t200 Zero Client model to find the model-specific QuickSpecs. Figure 1-1 Front panel components (1) Power LED (3) Line-out (headphone) audio connector (2) Line-in (microphone) connector (4) USB 2.0 connectors (4) NOTE: If the optional DC adapter is not connected, the t200 Zero Client supports a standard USB keyboard and USB mouse plus one 100 mA USB device (low power), such as some flash drives.
2 Rear Panel Components For more information, http://www.hp.com and search for your specific t200 Zero Client model to find the model-specific QuickSpecs.
3 Serial Number Location Figure 3-1 Serial number location Every t200 Zero Client includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance.
A Specifications Table A-1 t200 Zero Client Dimensions Width (side to side) Height (without mounting bracket) Height (with mounting bracket) Depth (front to back) 136 mm 5.35 in. 35 mm 1.38 in 41 mm 1.61 in 91 mm 3.58 in. 343 g 12.1 oz 381 g 13.44 oz 10° to 40° C 50° to 104° F -30° to 60° C -22° to 140° F Approximate Weight Without mounting bracket With mounting bracket Temperature Range * Operating** (max. rate of change is 10° C per hour or 18° F per hour) Nonoperating (max.
B Security Provisions HP t200 Zero Client for MultiSeat Security Clip The t200 Zero Client ships with a security clip which can be fastened to the rear panel of the t200 Zero Client. To prevent unauthorized removal of the t200 Zero Client, fasten a padlock through the clip and a cable. Securing the HP t200 Zero Client for MultiSeat Figure B-1 Securing the t200 Zero Client ENWW 1.
Securing the HP t200 Zero Client for MultiSeat in the Mounting Bracket Figure B-2 Securing the t200 Zero Client in the mounting bracket 6 1. With the tab of the t200 Zero Client security clip pointing down, insert the t200 Zero Client security clip between the guides on the back of the t200 Zero Client into the slot on the back of the mounting bracket (1). Use the provided screw to fasten the security clip to the t200 Zero Client (2). 2.
C Mounting the HP t200 Zero Client for MultiSeat Before mounting the t200 Zero Client, be sure to attach the mounting bracket. Mounting Bracket The t200 Zero Client ships with a mounting bracket which should be used to secure the t200 Zero Client to various mounting solutions. The bracket incorporates four mounting points on one side of the unit.
Releasing the HP t200 Zero Client for MultiSeat from the Mounting Bracket Figure C-2 Removing the mounting bracket Supported Mounting Options Figure C-3 t200 Zero Client mounted on back of monitor stand 8 Appendix C Mounting the HP t200 Zero Client for MultiSeat ENWW
Figure C-4 t200 Zero Client mounted on back of monitor Figure C-5 t200 Zero Client mounted on wall Figure C-6 t200 Zero Client mounted under desk ENWW Supported Mounting Options 9
Non-supported Mounting Option CAUTION: Mounting the t200 Zero Client in an non-supported manner could result in failure of the mounting bracket and damage to the t200 Zero Client and/or other equipment. Do not mount the t200 Zero Client on a flat panel monitor stand, between the panel and the stand.
D HP t200 Zero Client for MultiSeat Operation Routine t200 Zero Client Care Use the following information to properly care for the t200 Zero Client: ● Never operate the t200 Zero Client with the outside panel removed. ● Keep the t200 Zero Client away from excessive moisture, direct sunlight, and extreme heat and cold. For information about the recommended temperature and humidity ranges for the t200 Zero Client, see Specifications on page 4. ● Keep liquids away from the t200 Zero Client.
Figure D-2 Under monitor stand 12 Appendix D HP t200 Zero Client for MultiSeat Operation ENWW
Non-supported Orientation HP does not support the following orientation for the t200 Zero Client. CAUTION: Non-supported placement of the t200 Zero Client could result in operation failure and/or damage to the devices. CAUTION: The t200 Zero Client requires proper ventilation to maintain operating temperature. Do not block the vents. Do not put the t200 Zero Client in a drawer or other sealed enclosure. Do not place a monitor or other object on top of the t200 Zero Client.
E Shipping Information Shipping Preparation Follow these suggestions when preparing to ship the t200 Zero Client: 1. Turn off external devices connected to the t200 Zero Client. 2. Disconnect the system components and external devices from their power sources, then from the t200 Zero Client. 3. Pack the system components and external devices in their original packing boxes or similar packaging with sufficient packing material to protect them.
Index A altitude specifications 4 N non-supported orientations in a drawer 13 under a monitor 13 B bracket, mounting 7 C cautions mounting t200 Zero Client 10 t200 Zero Client orientation 11, 13 ventilation 13 components front panel 1 rear panel 2 D DC adapter, optional 1 DC power connector 2 dimensions 4 F front panel components 1 H hardware specifications 4 headphone connector location horizontal orientation 11 humidity specifications 4 1 M microphone connector location 1 monitor 1 mounting bracket 7