Hardware Reference Manual

Hardware Reference Guide 2–5
Hardware Upgrades
Accessing the T30 System Board
Å
WARNING: Before removing the side access panel, ensure that the
Thin Client is turned off and that the power cord is disconnected from
the electrical outlet.
To access the T30 system board:
1. Remove the security cable lock, if installed. See the security
cable lock instructions for information on how to remove
the lock.
2. Remove the screw
1
from the back panel next to the PCMCIA
slot cover.
3. Slide the side access panel straight back
2
as shown in the
following illustration.
Removing the T30 Side Access Panel
254241-001.book!!Page!5!!Tuesday,!June!25,!2002!!2:22!PM