Hardware Reference Manual

2–6 Hardware Reference Guide
Hardware Upgrades
Installing Thin Client Options
There are several options available for installation on Compaq
Thin Clients such as flash memory, SODIMM, PCMCIA, and
security hardware (see Appendix B for security hardware). Not all
Thin Clients support the same options. Visit the Compaq website at
http://www.compaq.com/products/thinclients/options/index.html
to see
what options are supported on your Thin Client, to order your
available options, and to download the complete installation
instructions for your options.
The following sections contain some general installation instructions
for some of the available options. In all cases, see the specific
installation instructions applicable to the Thin Client option.
Flash Memory Installation
If your Thin Client can be upgraded with the optional flash memory,
use the following instructions as an overview of this procedure.
Ä
CAUTION: If necessary, back up any data before continuing the
installation.
✎
In addition to following these instructions, follow the detailed
instructions that accompany the flash memory you have purchased.
These instructions are available for download from the Compaq
website.
T20 Flash Memory Installation
1. Follow the applicable instructions in the “General Hardware
Installation Sequence” section at the beginning of this chapter.
2. Access the Thin Client system board.
3. Remove any existing flash memory if installed.
254241-001.book!!Page!6!!Tuesday,!June!25,!2002!!2:22!PM