Hardware Reference Manual

2–10 Hardware Reference Guide
Hardware Upgrades
PCMCIA Wireless Card Installation
If your Thin Client supports an optional PCMCIA wireless card,
follow the Thin Client-related instructions included in the Compaq
option kit. Compaq also supports several third-party wireless cards.
Visit
http://www.compaq.com\support\thinclients
for installation
instructions.
In order to use an optional PCMCIA wireless card, it is necessary
to remove the PCMCIA slot cover located on the back of your
Thin Client. See the following sections for the instructions applicable
to your Thin Client.
Accessing the T1010 PCMCIA Slot
To access the T1010 PCMCIA slot, perform the following:
1. Remove the screw
1
as shown in the following illustration.
2. Rotate the cover
2
as shown.
Accessing the T1010 PCMCIA slot
✎
You will not be able to close the slot cover after a PCMCIA card is
installed.
254241-001.book!!Page!10!!Tuesday,!June!25,!2002!!2:22!PM