Maintenance & Service Guide HP EliteOne 800 G1 All-in-One

Tilt/swivel stand (optional)
To remove the stand:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 34).
2. Push the release button (1) on the bottom of the stand and pull the back of the stand off (2) the
computer.
3. Push the base of the stand down (1), and loosen the captive screws securing the stand to the unit
(2).
38 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis