User's Manual

HP Sygate Security Agent User Guide

Protocol

Specifies a protocol for the rule.

All Protocols

Applies to all protocols on all ports, for both incoming and outgoing traffic.

TCP

Displays two more list boxes in which you can specify which ports (remote and/or local)

should be affected by the rule. You can type the port numbers or select the port type from

the list boxes for the both local and remote ports.

If you do not enter or select a port number, then all ports will be affected by the rule. If you

enter a port number for the local port entry, but not for the remote port entry, then the local

port you entered and ALL remote ports will be affected by the rule.

Then, select which traffic direction should be affected by the rule.

UDP

Displays two port list boxes. You can type the port numbers or select the port type from the

list boxes for both local and remote ports. If you do not enter or select a port number, then