HP Color LaserJet Pro M253-M254 - User Guide
3. On the Device Information page, the default printer name is in the Device Description eld. You can change
this name to uniquely identify this printer.
NOTE: Completing the other elds on this page is optional.
4. Click the Apply button to save the changes.
Manually congure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
NOTE: The steps vary according to the type of control panel.
1 2
1 2-line control panel
2 Touchscreen control panel
2-line control panels
1. On the printer control panel, press the OK button.
2. Open the following menus:
● Network Setup
● IPv4 Cong Method
● Manual
3. Use the arrow keys and the OK button to enter the IP address, subnet mask, and default gateway, and then
touch the OK button to save the changes.
Touchscreen control panels
1. From the Home screen on the printer control panel, touch the Setup button.
2. Scroll to and touch the Network Setup menu.
3. Touch the IPv4 Cong Method menu, and then touch the Manual button.
4. Use the keypad on the touchscreen to enter the IP address, and touch the OK button. Touch the Yes button
to conrm.
ENWW Congure IP network settings 59