User Manual

LED control-panel view
1
3
2
5 46
9
7
8
10
1 Control panel LED display This screen displays error codes and numerical information for copy jobs.
2 Up arrow button Use this button to increase the value that appears on the display.
3 Down arrow button Use this button to decrease the value that appears on the display.
4
Start Color Copy
button
Press this button to start a color copy job.
5
Start Mono Copy
button
Press this button to start a mono copy job.
6
Copy Setup button
Use this button to navigate through the Number of Copies, Lighter/Darker, and Reduce/Enlarge
options. The default option is Number of Copies.
7
Cancel button
Press this button to perform the following actions:
●
Cancel a print job when the printer is printing.
●
Reset the current copy settings to the default values when the printer is idle.
●
Exit Copy Default Setting mode without saving the value when the printer is in Copy Default
Setting mode.
8 Attention LED The Attention light blinks when the printer requires user attention, such as when the printer runs out
of paper or a toner cartridge needs to be changed. If the light glows without blinking, the printer has
experienced an error.
9 Ready LED The Ready light glows without blinking when the printer is ready to print. It blinks when the printer is
receiving print data or canceling a print job.
10 Supplies LEDs A Supplies light blinks when a supply error occurs, and it glows without blinking when the supply is
very low and replacement is required.
4 Chapter 1 Printer overview ENWW