HP EliteDesk 800 G1 Desktop Mini HP ProDesk 600 G1 Desktop Mini Maintenance & Service Guide

External connection antennas (select models only)
The external connection antennas route from the WLAN module to the cable connectors on the rear of
the computer.
To install the antennas:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 25).
2. Remove the access panel (see
Access panel on page 26).
3. Remove the hard drive (see
Hard drive on page 28).
4. Remove the drive cage (see
Drive cage on page 47).
5. Remove the heat sink (see
Heat sink on page 43).
6. Remove the fan (see
Fan on page 46).
7. Using a screwdriver, pry out the two knockouts that cover the antenna cable connector holes on
the back of the computer.
External connection antennas (select models only)
53