Hardware manual

Hardware Guide 8–1
8
External Device Connections
Standard Device
The jacks and connectors described in this guide support standard
external devices.
■ For information about which jack or connector to use, refer to
the documentation included with the device.
■ For information about installing or loading any software
required by the device, refer to the device documentation, the
operating system Help files, or the device manufacturer’s
Web site.
To connect a standard external device to the tablet PC:
1. If you are connecting a powered device, be sure the device is
turned off.
2. Connect the device to a jack or connector on the tablet PC.
3. If you are connecting a powered device, plug the device
power cord into a grounded electrical outlet.
4. Turn on the device.
✎
If a properly connected display device does not display an image,
try pressing the Q menu button > Internal and External item or
External Only item to switch the image to the new device.
To disconnect a standard external device from the tablet PC, turn
off the device (if it is powered), then disconnect the device from
the tablet PC.
331734-001.book Page 1 Monday, July 14, 2003 3:47 PM