- Hewlett-Packard Network Card User Manual

Appendix A Event Codes
Pager
Code Server Event Severity
02101
SCSI Duplex Board has been inserted INFORMATIONAL
02502
Cache Protocol and Parity error CRITICAL
02516
ACPI hardware failure WARNING
0274X
Hot Swap Cage: SCSI Bus type has changed WARNING
0274X
Hot Swap Cage: SCSI cable removed WARNING
0274X
Hot Swap Cage: SCSI cable attached INFORMATIONAL
02840
Hot Swap Cage: SCSI terminator removed WARNING
02841
Hot Swap Cage: SCSI terminator attached INFORMATIONAL
03300
PCI Hot Plug fault deasserted INFORMATIONAL
03300
PCI Hot Plug fault asserted CRITICAL
03305
PCI Hot Plug powered on INFORMATIONAL
03305
PCI Hot Plug powered off INFORMATIONAL
03406
Normal ACPI server shutdown INFORMATIONAL
19900
Server Management Controller started INFORMATIONAL
19901
SDR area cleared. INFORMATIONAL
19902
FRU internal use area cleared INFORMATIONAL
20000
Failed Remote Management login attempt WARNING
20001
Remote management user has logged in INFORMATIONAL
20002
Remote management user logged out INFORMATIONAL
20003
Remote management user automatically logged out INFORMATIONAL
20004
Remote management user connection lost INFORMATIONAL
20005
Remote management user dialback failed INFORMATIONAL
20006
Integrated RA configuration reset to defaults WARNING
20100
Remote-initiated <Ctrl-Alt-Del> INFORMATIONAL
20101
Remote-initiated reset INFORMATIONAL
20102
Remote-initiated power cycle INFORMATIONAL
20103
Remote-initiated power down INFORMATIONAL
20104
Remote-initiated power up INFORMATIONAL
20105
Automatic power shutdown due to critical condition. CRITICAL
20106
Front panel power down. INFORMATIONAL
20107
Automatic graceful shutdown of NOS WARNING
20108
Remote-initiated graceful shutdown of NOS INFORMATIONAL
201XX
Voltage Utilization warning WARNING
201XX
Voltage Utilization error CRITICAL
20201
Remote management user page: Modem error INFORMATIONAL
60