User's Manual
Telnet Settings
The settings for a Telnet host connection are specified using the Telnet Settings dialog which can be
displayed using one of the following three methods:
Using the Session Wizard
◦
In Step 1 set Connection to Telnet then click Configure.
Using the TeemTalk Window
◦
On the Session menu, select Connection > Telnet then select Configure
Connection....
◦
On the configuration bar, click Configure Telnet.
Specify the settings required by the host using the options described below, then click the Connect
button.
●
Terminal Id
Factory default: Depends on the selected terminal emulation
This specifies the terminal identification string that is passed to the host.
●
Send Echo
Factory default: Unchecked
When this option is unchecked the emulator is prevented generating the Telnet echo option on
connection.
●
Send CR with Break
Factory default: Unchecked
This determines whether a Carriage Return is sent with a Telnet break packet.
●
Send TM with Break
12 Chapter 3 Host Connection