User's Manual

●
Auto wrap
Factory default: Checked
The setting of this option determines whether characters wrap to the next line when the right
margin is reached. When unchecked, on reaching the right margin, the last character position will
be overwritten by every new character received.
●
Auto line feed
Factory default: Unchecked
When checked, a line feed command will be appended to every received carriage return
command.
●
80/132 clears
Factory default: Unchecked
This option applies to the WY-50+ and WY-60 emulations and determines whether or not data is
cleared from the display when the number of columns is changed. The screen is always cleared
when the number of columns is changed in the other emulations.
●
Economy 80
Factory default: Unchecked
This option applies to the WY-50+ and WY-60 emulations and enables 80 column display with
more lines of display memory.
●
WRPT dim
Factory default: Checked
This option applies to all emulations and enables you to specify the appearance of write-protected
characters on the display. Checking this option will cause the characters to be dimmed.
●
WRPT invisible
Factory default: Unchecked
This option applies to all emulations and enables you to specify the appearance of write-protected
characters on the display. Checking this option will cause the characters to be invisible. Note that
the WY-50+ and WY-60 emulations also support the invisible attribute.
●
WRPT reverse
Factory default: Unchecked
This option applies to all emulations and enables you to specify the appearance of write-protected
characters on the display. Checking this option will cause the characters to be displayed in
reverse video.
●
WRPT underline
Factory default: Unchecked
This option applies to all emulations and enables you to specify the appearance of write-protected
characters on the display. Checking this option will cause the characters to be underlined. Note
that the WY-50+ and WY-60 emulations also support the underline attribute.
228 Chapter 20 Wyse Emulations