HSG80 ACS Solution Software Version 8.7 for Compaq Tru64 UNIX Installation and Configuration Guide
Table Of Contents
- HSG80 ACS Solution Software Version 8.7 for Compaq Tru64 UNIX Installation and Configuration Guide
- About this Guide
- 1- Planning a Subsystem
- Defining Subsystems
- What is Failover Mode?
- Selecting a Cache Mode
- Enabling Mirrored Caching
- What is the Command Console LUN?
- Determining Connections
- Assigning Unit Numbers
- What is Selective Storage Presentation?
- 2- Planning Storage Configurations
- Where to Start
- Determining Storage Requirements
- Configuration Rules for the Controller
- Addressing Conventions for Device PTL
- Choosing a Container Type
- Creating a Storageset Profile
- Planning Considerations for Storageset
- Changing Characteristics through Switches
- Specifying Storageset and Partition Switches
- Specifying Initialization Switches
- Specifying Unit Switches
- Creating Storage Maps
- 3- Preparing the Host System
- Installing RAID Array Storage System
- Making a Physical Connection
- Preparing LUNs for Access by Tru64 UNIX FileSystem
- DECsafe Available Server Environment (ASE)
- HSG80 Units and Tru64 UNIX Utilities
- Solution Software Upgrade Procedures
- New Features, ACS 8.7 for Tru64
- 4- Installing and Configuring HSG Agent
- 5- FC Configuration Procedures
- Establishing a Local Connection
- Setting Up a Single Controller
- Setting Up a Controller Pair
- Configuring Devices
- Configuring Storage Containers
- Assigning Unit Numbers and Unit Qualifiers
- Configuration Options
- Verifying Storage Configuration from Host
- 6- Using CLI for Configuration
- 7- Backing Up, Cloning, and Moving Data
- A- Subsystem Profile Templates
- Storageset Profile
- Storage Map Template 1 for the BA370 Enclosure
- Storage Map Template 2 for the second BA370 Enclosure
- Storage Map Template 3 for the third BA370 Enclosure
- Storage Map Template 4 for the Model 4214R Disk Enclosure
- Storage Map Template 5 for the Model 4254 Disk Enclosure
- Storage Map Template 6 for the Model 4310R Disk Enclosure
- Storage Map Template 7 for the Model 4350R Disk Enclosure
- Storage Map Template 8 for the Model 4314R Disk Enclosure
- Storage Map Template 9 for the Model 4354R Disk Enclosure
- B- Installing, Configuring, and Removing the Client
- C- SWCC Agent in TruCluster Environment
- SWCC Overview
- Running the SWCC Agent on a V4.0G Cluster
- Running the SWCC Agent under ASE Services
- Running the SWCC Agent on a V5.x Cluster
- Problems with Running the Agent on Multiple Clusters
- Configure the Controller
- Use Multiple-Bus Failover Mode
- Verify That the HSG80/HSG60 Unit Offsets Are Zero
- Install and Run the Agent on One Cluster Member
- Example of Installing the Agent on a Cluster Member
- Create the CAA Action Script
- Create the CAA Resource
- Glossary
- Index
Using CLI for Configuration
6–2 HSG80 ACS Solution Software Version 8.7 for Compaq Tru64 UNIX Installation and
Configuration Guide
Figure 6–1 shows an example storage system map for the BA370 enclosure. Details on
building your own map are described in Chapter 2. Templates to help you build your
storage map are supplied in Appendix A.
Figure 6–1: Example storage map for the BA370 Enclosure
Figure 6–3 shows a representative multiple-bus failover configuration. Restricting the
access of unit D101 to host BLUE can be done by enabling only the connections to
host BLUE. At least two connections must be enabled for multiple-bus failover to
work. For most operating systems, it is desirable to have all connections to the host
enabled. The example system, shown in Figure 6–3, contains three non-clustered
Port
1 2 3 4 5 6
Power
Supply
D2
S2
DISK103
00
D2
S2
DISK203
00
D2
S2
DISK303
00
D2
S2
DISK403
00
D2
D101
DISK503
00
spareset
member
DISK603
00
Power
Supply
3
Tar gets
Power
Supply
D0
S1
MI
DISK102
00
D0
S1
M1
DISK202
00
D0
S1
M2
DISK302
00
D0
S1
M2
DISK402
00
D1
M3
DISK502
00
D1
M3
DISK602
00
Power
Supply
2
Power
Supply
D120
R2
DISK101
00
D120
R2
DISK201
00
D120
R2
DISK301
00
D120
R2
DISK401
00
D120
R2
DISK501
00
D120
R2
DISK601
00
Power
Supply
1
Power
Supply
D102
R1
DISK100
00
D102
R1
DISK200
00
D102
R1
DISK300
00
D102
R1
DISK400
00
D102
R1
DISK500
00
D102
R1
DISK600
00
Power
Supply
0