User's Manual

4 Press the Trigger MENU key.
5 Highlight the Arming Control field and press the Select key.
6 With the Skew field highlighted, press the Select key.
7 With the Analyzer field highlighted, press the Select key.
8 Use the knob to change the units to ns, and type in the time delay you
measured with the
Trig to O marker.
9 Press the Done key until you return to the Trigger Menu.
10 Highlight the Group Run field, and press the Select key. Highlight Single
in the pop-up menu, and press the Select key.
Aligning the Glitch Displayed by the Oscilloscope and Analyzer
Result The analyzer display is time-aligned with the scope display.
The timing waveform is
now lined up with the
oscilloscope waveform.
Triggering the Oscilloscope with the Timing Analyzer
Align the Glitch Displayed by the Oscilloscope and Analyzer
8-16