User's Manual

Modify Channel Assignments

In this exercise you will assign channels 8 through 11 to Pod A1, which is

attached to J1 of the training board. The analyzer will then use these

channels to capture the output of the pattern generator.

Highlight the field showing the 16 channels of Pod A1 to the far right

of the PATGEN label. Press the

Select key.

2 Using the knob, move the cursor to channel 11 in the pop-up menu.

Then, press the ⇑ (up-arrow) key to put asterisks in channels

positions 11 through 8.

3 Press the Done key.

Modifying the Channel Assignments

Result Channels 11 through 8 of Pod A1 are assigned to the label PATGEN.

The asterisks (*) assign

bits 8 through 11 of Pod

A1 to the label PATGEN.

Using the Pattern Generator

Modify Channel Assignments

9-7