User Guide
If installing a stand, position the monitor facedown on a at surface covered with protective sheet foam or a
nonabrasive cloth. This prevents the screen from getting scratched, defaced, or broken and prevents damage
to the control buttons.
Attaching the monitor stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
TIP: Consider the placement of the monitor, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Position the monitor head facedown on a at surface covered by a clean, dry cloth.
2. Press the base onto the neck of the stand on the back of the monitor (1). Then install two screws
(included) using the hexagonal wrench (included) (2).
Connecting the cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable.
● Connect one end of a DisplayPort cable to the DisplayPort port on the back of the monitor and the
other end to the DisplayPort port on the source device.
4 Chapter 1 Getting Started