User Guide

Attaching the monitor head to a mounting device
1. Remove the monitor head from the stand. See Removing the monitor stand on page 10.
2. Insert the tab at the bottom of the VESA bracket into the slot on the back of the monitor head (1), and
then tighten the screw (2).
IMPORTANT: Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
3. Attach the monitor to the wall or swing arm of your choice by inserting four mounting screws through
the holes on the mounting device and into the screw holes on the VESA bracket that was installed on the
back of the monitor.
Setting up the monitor 11