HP ProBook 440 G3 Notebook PC - Maintenance and Service Guide

Hard drive
Description Spare part number
Hard drives
1 TB, 5400 rpm, 7 mm 762990-001
750 GB, 5400 rpm, 7 mm 752099-001
500 GB, 5400 rpm, 7 mm 778186-001
500 GB, 5400 rpm, 7 mm, hybrid (8-GB SSD) 732000-001
500 GB, 7200 rpm, 7 mm 703267-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 33).
5. Remove the service door (see Service door on page 34).
To remove a hard drive:
1. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the hard drive to the chassis.
2. Pull the plastic tab to slide the hard drive (2) away from the center of the computer to disengage it from
the connector.
3. Remove the hard drive from the bay (3).
Component replacement procedures 35