HP ProBook 440 G3 Notebook PC - Maintenance and Service Guide

10. If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM2.0×4.0
screws that secure the panel to the display enclosure.
The raw display panel is available using spare part number 826402-001 for FHD panels and 826403-001
for HD panels.
11. Rotate the display panel all the way over (1), disconnect the display cable from the rear of the panel (2),
and then remove the display panel (3) from the enclosure.
12. If it is necessary to replace the display hinges, remove the 2 Phillips PM2.0×3.0 screws at the top (1) and
the 4 broadhead Phillips PM2.5×3.0 screws at the bottom (2) that secure the display hinges to the
display enclosure.
72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts