Intel Unite Solution - Plugin Guide for Protected Guest Access

Intel® Unite™ Solution – Plugin Guide for Protected Guest Access v1.9 Page 6 of 17
2. Plugin Installation and Components
2.1 Plugin Components
The following components are part of the Protected Guest Access plugin:
 Guest Access Client Plugin (dll)
o This is the plugin that is loaded by the hub. It implements the
functionality defined in the CFCPlugin.dll.
 Guest Access Service (Windows service)
o This is a windows service that is in charge of the creation and
configuration of the ad-hoc/hosted network (access point), the
GuestAccessClientPlugin.dll sends commands that are received and
processed by this service.
 Client Download Page
o Requires the Intel Unite app v3.0 for the client, configured to run and
connect to the Hub that hosts the ad-hoc network. It is available for
downloading once the network is created.
2.2 Plugin Installation
To install the Intel® Unite™ plugin for Protected Guest Access you will need
Administrator rights. You will also need to verify compatibility with your target version
of your Intel Unite solution (Intel Unite software versions 1.0 and 2.0 will not be
compatible with the latest released plugin versions).
LAN cable required: In addition to the minimum Hub requirements, the only supported
network configuration is if the Hub is connected to the corporate network through a
wired connection and the wireless network adapter is not connected to another access
point.
Before you install the Protected Guest Access Plugin, ensure you have the latest Intel
Wireless driver. If this is not the case you need to install it.