Installation guide

Workstations 6-33
Meridian MAX Installation Guide Product release 8
Figure 6-7
DEC VT420 workstation (Worldwide model) set-up
Global Display General Comm Printer Keyboard Tab
Clear Display Clear Comm Reset Session Recall Save
Set-Up = English * North American Keyboard ** Default
Set-Up Directory
To Next Set-Up To Directory 80 Columns Interpret Controls
No Auto Wrap Jump Scroll Dark Screen
No Cursor Block Cursor Style No Status Display
Display Set-Up
To Next Set-Up To Directory VT400 Mode, 8 Bit Controls
User Defined Keys Unlocked User Features Unlocked 8-bit Characters
Numeric Keypad Normal Cursor Keys No New Line
General Set-Up
To Next Set-Up To Directory Transmit = 9600 Receive = Transmit
XOFF at 128 8 Bits, No Parity 1 Stop Bit No Local Echo
Data Leads Only Disconnect, 2 s Delay Limited Transmit
Communications Set-Up
Enable Sessions Disable Sessions Exit Screen Align
To Next Set-Up To Directory
On Line S1 = Comm1 CRT Saver
Comm1 = RS–232 *** 70 Hz Printer Shared
Global Set-Up
Cursor Blink 6X24 pages 24 Lines/Screen
Vertical Coupling Page Coupling No Auto Resize Screen
UPSS ISO Latin-1 VT420 ID
No Auto Answerback Answerback= Not Concealed
When Available Update
Modem High Speed = Ignore Modem Low Speed = ignore
Note: * This setting specifies the DEC set-up language and does not affect the Meridian MAX screens.
** Change this setting to match the keyboard language you are using.
*** This setting depends on the port you are using on the back of the terminal. Refer to your terminal
guide for more information.
To Next Set-Up To Directory Typewriter Keys Caps Lock
No Auto Repeat Keyclick Off Margin Bell Off Warning Bell High
Character Mode <X] Delete Local Compose Ignore Alt
Keyboard Set-Up
F1 = Hold F2 = Print F3 = Set-Up F4 = Session F5 = Break
,< and .> Keys <> Key ‘~ Key