Installation guide

6-38 Workstations

553-4001-111 Standard 1.0 March 1997

9 Ensure that the options match the following Port 1 settings:

PORT 1

•Communication Full Duplex

•Data Length 8 bits

•Parity None

•Stop Bits 1

•Xmit Baud 9600

•Recv Baud =Xmit

•Xmit Pace Xon/Xoff

•Recv Pace Xoff at 128

•Limited Transmit On

•DSRI No

•CTS Ignore

•CD Ignore

•Break Duration 170 ms

•Disconnect Delay 2 sec

•Aux Printer Type National

10 To save the Port 1 settings, press the [SAVE MENU] key.

11 Ensure that the options match the following KeyBrd Menu settings:

KEYBRD Menu

•Lock Key Caps Lock

•Kbd Lock Enable Yes

•Save Tabs Yes

•Auto Repeat No

•Margin Bell No

•Warning Bell Yes

•Auto Answerback No

•Answerback= [blank]

•Conceal Answerback No

•Clear All Tabs (not applicable)

•Set 8 Column Tabs (not applicable)

•Tab Setting (not applicable)

12 To save the Keybrd Menu settings, press the [SAVE MENU] key.

13 To exit the set-up screen, press the {Set-Up} key.