Installation guide

9-4 Meridian MAX system configuration

553-4001-111 Standard 1.0 March 1997

Port assignment procedure

Perform the procedures in this chapter only if you were referred to it by a

software installation or operating modes procedure. For operating modes,

only the port assignment section is required. Once you have completed the

procedures, return to the software installation or operating modes procedure

you were performing.

Procedure 9-1

To assign Meridian MAX ports

1 Ensure that you have completed your software installation procedure

up until the point where the Meridian MAX Hardware and System

Parameters menu appears and you are referred to this chapter.

Figure 9-1

Meridian MAX Hardware and System Parameters

1. Port Assignment

2. System Parameters

3. External Interface Configuration

4. Exit

Use up and down arrows to move among menu items and press

ENTER to make a selection.

Note:

The External Interface Configuration feature only appears on

this menu if the MSI option or MEI option, or both, are enabled.

2 To enter your port assignments, enter 1, followed by {RETURN} or

highlight the field using the cursor keys, followed by {RETURN}.

The Meridian MAX Communication Port Assignment screen appears.