Installation guide

9-14 Meridian MAX system configuration
553-4001-111 Standard 1.0 March 1997
The value of the Home Location Code is the value you should enter for the
Meridian 1 network node address on the System Parameters screen. If your
system has NAC, the Meridian 1 network node address is used by NAC for
logging on. On the NAC’s Network Definition/Installation screen, the Node
Address field must match the Meridian 1 Network Node Address field in the
Meridian MAX system.
The Meridian 1 network node address can only contain numbers and
decimals. It must also match the node address assigned to the Meridian 1. If
no address was assigned to the Meridian 1, the default value is 338.
NAC to MAX Login Password
This field shows the password required for the NAC supervisor to log in to
the MAX. The password shown must match the password used on the
NAC.
This field only appears if your system has NAC connectivity enabled.
MAX Hostname
This field shows the name assigned to your Meridian MAX. This field only
appears if your system has at least one LAN session defined, or the MSI
option or MEI option enabled.
MAX IP Address
This field shows the LAN address assigned by your LAN administrator to
your Meridian MAX. Only numeric characters and decimal points can be
used in this field.
The IP address is in the format a.b.c.d, where a falls within the range of 0
to 223 (excluding 127), and b, c, and d fall within the range of 0 to 254.
This field only appears if your system has at least one LAN session defined,
or the MSI option or MEI option enabled.
MAX Subnet Mask
This field shows the subnet mask of the network. This field is either the
system default or a value assigned by your network administrator.
If the system IP address is changed, the default subnet mask changes as
well.
The subnet mask is in the format a.b.c.d, where a, b, c, and d fall within the
range of 0 to 255.