Installation guide

9-28 Meridian MAX system configuration
553-4001-111 Standard 1.0 March 1997
Basic Capacity Configuration procedure
Perform this procedure after assigning the ports, setting the system
parameters, and assigning the MSI and MEI links.
Procedure 9-4
To assign the basic capacity configurations
1 Follow the procedures described in this chapter to assign the ports,
system parameters, MSI links, and MEI links.
2 Display the Meridian MAX Hardware and System Parameters menu.
Figure 9-8
Meridian MAX Hardware and System Parameters
Meridian MAX Hardware and System Parameters
1. Port Assignment
2. System Parameters
3. External Interface Configuration *
4. Exit
Use up and down arrows to move among menu items and press
ENTER to make a selection.
* Note: The External Interface Configuration feature only appears if MSI
or MEI is enabled.
3 Enter 4, followed by {RETURN} to exit.
4 If you are performing an operating mode procedure (such as switching
from Training to Precutover, or from Precutover to Product), return to
that operating mode.
5 Wait for the system to display the Basic Capacity Configuration screen.
This is only a sample. Your values may differ.
telemanuals.com