Installation guide

11-8 New software installations
553-4001-111 Standard 1.0 March 1997
If this configuration does not match your configuration,
or if this configuration is not the configuration ordered,
please type “n” to the following question. The installation
will abort. Please call your service representative for
further assistance.
–––> Do you wish to install the hardware configuration
specified above (y/n) ?
15 If you want to abort the installation, enter n, followed by {RETURN}. If
you want to install the hardware configuration, enter y, followed by
{RETURN}.
16 The system displays the Meridian MAX Software Installation Menu.
Since this procedure is a new installation, enter 1, followed by
{RETURN}.
The Meridian MAX Software Installation Menu
-––––––––––––––––––––––––––––––––––––––––––-
1 New Installation
2 Installation Upgrade
3 Application Upgrade
–––>Enter a number to select the type of installation/upgrade
desired, or enter q to quit :
17 The system continues.
Will perform a New Installation.
–––> Do you wish to restart a previously-aborted installation (y/n)?
18 If you do not want to restart a previously aborted installation, enter n,
followed by {RETURN}. Go to Step 20.
If you want to restart a previously aborted installation, enter y, followed
by {RETURN}. The system continues.
***> Determining whether the new installation can be re-started...
The system displays the Meridian MAX Installation/Upgrade Restart
Menu.
Note: Only those reentry points that have been verified by your system
are shown in the Meridian MAX Installation/Upgrade Restart Menu.