Installation guide

New software installations 11-21
Meridian MAX Installation Guide Product release 8
Autoboot in progress... To abort hit <BREAK>
Booting from xxxxxx, Controller 0, Device 0
Note : (The “xxx” will be VME177 for SNN-E, VME167 for SNN, and
M4120 for IPE/IPE-E.)
Loading: Operating System
Volume: $00000000
IPL loaded at: $001F0000
VME Disk IPL Version 52.2
***
erase = DEL kill = ^u intr = ^c quit = ^x
***
Note: The previous message indicates that the {CONTROL}{C} keys
pressed simultaneously cause a system interruption which terminates
the current process. The {DEL} key deletes and backspaces one
character.
xxx SCSI configuration
Note : (The “xxx” will be 177 for SNN-E, and 167 for SNN or IPE/IPE-E.)
Device Addr Vers Revision Serial# Blocks Size Vendor Description
–––––– –––– –––– –––––––– ––––––– ––––––– –––– ––––––––––––––––––
Disk 00 0002 8770... ....... 2054325 0512 SEAGATE ST11200N
Tape 40 0001 RV J... ....... 0000000 0000 TEAC MT–2ST/F50B
This configuration is only an example. Your system may differ.
Enter <CR> to pause in a single user shell before init.
Default boot sequence continuing...
The system is coming up. Please wait.
Node name set to MAX00.
Updating serial devices for current CPU
mount –f S51K /dev/usr /usr
Checking for system dump messages...