Installation guide

12-12 Workstation, HSL, and LML configuration
553-4001-111 Standard 1.0 March 1997
19 Enter STA_ADMIN to designate Port 0 for the STA administration
terminal.
The system displays the following prompt:
BPS
20 Enter 9600 to set the baud rate.
The system displays the following prompt:
PARY
21 Enter NONE to set the parity type.
The system displays the following prompt:
STOP
22 Enter 1 to set the number of stop bits.
The system displays the following prompt:
BITL
23 Enter 8 to set the data bit length.
The system displays the following prompt:
PARM
24 Enter R232 DCE to set the interface and transmission mode.
The system displays the following prompt:
FUNC
25 Enter ABD FCL LME to set the MSDL card functions.
The system displays the following prompt:
USER
26 Enter MTC SCH BUG to set the output message types.
The system displays the following prompt:
XSM
27 Enter NO to set the SDI port for the system monitor.
The system displays the following prompt:
TTYLOG
28 Enter {RETURN} to set the log buffer size.
29 Enter **** to exit Overlay program 17.