Compaq 516 Notebook PC Compaq 515 Notebook PC Compaq 511 Notebook PC and Compaq 510 Notebook PC - Maintenance and Service Guide

Removal and replacement procedures
Maintenance and Service Guide 4–23
9. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect the
keyboard cable 2 from the system board.
10. Remove the keyboard.
11. Release the ZIF connector 1 to which the power button board cable is attached, and disconnect the power
button board cable 2 from the system board.
12. Remove the switch cover 3.
Reverse this procedure to install the keyboard and switch cover.