User Manual

Command line 19
Managed element Description
radius
(on page 98)
Manage RADIUS authentication settings
radius-group
(on page 97)
Manage RADIUS group configuration settings
role
(on page 99)
Manage user authentication order by access role (privilege)
server
(on page 104)
Manage physical HP BladeSystem server blades
serverid (on page 106)
Manage virtual server ID configuration settings
server-port
(on page 103)
Display all physical server ports
server-port-map
(on page 101)
Manage shared server downlink port mapping configuration
server-port-map-range (on page 100)
Manage ranges of shared server downlink port mapping
configurations
session
(on page 107)
Manage the session timeout value
sflow
(on page 108)
Manage the existing VC Ethernet network with sFlow
sflow-module
(on page 108)
Manage the network interface settings created for sFlow
sflow-ports
(on page 110)
Manage the ports to be sampled or polled for a receiver
sflow-receiver
(on page 112)
Manage the receivers
snmp
(on page 117)
Modify SNMP configurations
snmp-access
(on page 114)
Manage SNMP access configurations
snmp-trap
(on page 115)
Modify SNMP-trap configurations
snmp-user
Manage SNMP user profiles
ssh
(on page 118)
Manage SSH configuration and information
ssl
(on page 123)
Manage SSL configuration and information
ssl-certificate
(on page 119)
Manage SSL certificate information
ssl-csr
(on page 120)
Manage an SSL certificate signing request
stackinglink
(on page 123)
Display stacking link information and status
statistics (on page 124)
Display or reset statistics on a designated interconnect module
port
statistics-throughput
(on page 126)
Manage the port throughput statistics
status
(on page 127)
Display overall VC domain status information
storage-management
(on page 128)
Manage iSCSI storage management information
supportinfo
(on page 129)
Generate VC support information
systemlog
(on page 130)
Display the VCM system event log
tacacs
(on page 131)
Manage TACACS+ authentication settings
uplinkport
(on page 132)
Manage interconnect module uplink ports
uplinkset
(on page 135)
Manage shared uplink port sets
user
(on page 138)
Manage local VC user configurations
user-security
(on page 137)
Manage user security settings
vcm
(on page 140)
Manage the VC domain manager
version
(on page 141)
Display CLI version information
The following sections provide detailed information for using the subcommands with each managed element.
To display command help, enter a command followed by ? or -help. For more information on the help
subcommand, see "Help subsystem (on page 147)."