HP FlexFabric Virtual Switch 5900v Configuration Examples

13
Figure 14 Expanding the Telnet Settings area
# Configure the same login authentication as you configured on the HP 5900 switch:
− To disable login authentication, select No Username + No Password from the
Authentication Mode list, enter a timeout interval for Timeout (1-60 seconds), and then click
OK.
Figure 15 Disabling authentication
− To enable password authentication, select Password (No Operator or Super/Manager)
from the Authentication Mode list, enter the password, enter a timeout interval for Timeout
(1-60 seconds), and then click OK.
Figure 16 Configuring password authentication