HP FlexFabric Virtual Switch 5900v Configuration Examples

19
Figure 26 Configuring network policies
# Click Save and Release.
b. Create a VSI type for file service and associate the VSI type with the file service network (VLAN
200).
# Click the Add tab on the VSI Type page, as shown in Figure 25.
# On the page that appear
s, configure the VSI type and network policy, as shown in Figure
27:
Area Items
Basic Information
• Name—Enter the VSI type name. For easy management, you can set
the VSI name to be the same as the network name.
• Network—Select the network to be associated with the VSI type. In
this example, select the network (VLAN200) created for file service.
• Description—Enter a VSI description for management purposes.
Service Unit List
Select types of QoS actions you want to apply to the VSI.
Parameter Settings
Configure QoS settings for the VSI type. A setting takes effect only if you
have selected the QoS action type that uses the setting.
To identify the parameters required for a QoS action type, hover over
the action type in the Service Unit List. IMC will display a green check
sign (
9
) transiently in front of each parameter required for the action
type.
IMPORTANT:
These QoS settings will be applied to the VSIs created on the physical
access switch for VMs. When you set the filtering direction, select
INBOUND to apply the QoS settings to the traffic from the VM server to