HP FlexFabric Virtual Switch 5900v Configuration Examples

31
Figure 46 Configuring VDP settings for the port group
6. Create a downlink port group for file service:
# On the HP Port Group 5900v tab, click Create at the top left of the configuration pane.
Figure 47 HP Port Group 5900v tab
# Enter a port group name (for example, VLAN 200), set the maximum number of downlink virtual
NICs allowed in the group, and then click OK.
Figure 48 Creating a port group for file service
# On the HP Port Group 5900v tab, click the link in the VLAN column to configure VLAN settings
for the port group.
Figure 49 Clicking the VLAN link for the port group
# Select VLAN Access, enter the VLAN ID for file service, and then click OK.