HP FlexFabric Virtual Switch 5900v Installation Guide

42
Figure 47 Removing a host from the VDS
6. Access the HP VDS HP 5900v tab. For more information, see "Accessing the virtual switch".
7. In the Virtual Distributed Switch area, click the icon for the VDS and click OK in the dialogue
box that appears.
8. In the VFE (Virtual Forwarding Engine) area, click VFE Configuration.
9. Select the host that contains the VFE, and then click Uninstall.
Figure 48 Selecting the VFE to remove
10. Click OK to remove the VFE.
NOTE:
Removing VFEs does not release the VFE licenses. To release VFE licenses, select the VFE-installed ESXi
host and click Unlicense.
Removing the VMware plug-in
The VMware plug-in is automatically installed on the VMware vCenter Server when the VCE is installed.
To remove this plug-in, you must use the HP FlexFabric Virtual Switch Orchestration Software for 5900v
provided by the VCE.