HP FlexFabric Virtual Switch 5900v Installation Guide

49
5. Log out of the vSphere Client and the HP 5900v Global Configuration page, and log in again.
6. Enter the VFE configuration page.
Figure 58 Enter the VFE configuration page
7. Select the corresponding host and click Install to upgrade the VFE.
Figure 59 Upgrading the VFE
Performing software rollback
If software upgrade fails and you need to roll back to the last version, perform the following steps:
1. Enter the rollback directory and execute the ./rollback.sh command.
The VCE automatically reboots after rollback is completed.